General Description
Hitex is a dense, rigid material produced in multi-ply construction from unbleached Kraft pulp. Hitex has excellent dielectric and mechanical strengths, low water absorption and is free of conducting particles, chemical impurities and foreign matter. Its chemical cleanliness accounts for its excellent aging characteristics.
Hitex can be used in numerous coil, transformer, motor, electrical hardware and electronic applications where excellent dielectric and physical strengths are required. It is not advocated for use with dielectric liquids.
Hitex is available in sheets, strips, mill rolls and slit rolls in thicknesses from .007” to .062”. Above .062” available only in sheets and strips.
PHYSICAL, ELECTRICAL AND CHEMICAL PROPERTIES:
| Fiber Content |
100% Unbleached Kraft Wood Pulp |
| Ash Content (Max.) |
.75% |
| pH Water Extract |
6.0 - 7.5 |
| Moisture Content |
7.0% Avg. |
| Standard Thickness, ± 7% |
Inches |
.007 |
.010 |
.015 |
.020 |
.025 |
.031 |
| Apparent Density, (Air Dry), ± 7% |
g/cc |
1.00 |
1.00 |
1.05 |
1.05 |
1.05 |
1.05 |
| Weight, (Air Dry), ± 7% |
lbs./sq. ft. |
.038 |
.054 |
.082 |
.109 |
.136 |
.169 |
| Tensile Strength, (Avg.) |
MD lbs./In. |
145 |
200 |
325 |
425 |
540 |
660 |
| CMD lbs./In. |
35 |
40 |
60 |
75 |
100 |
110 |
| Burst Strength, (Avg.) |
lbs./sq. in. |
110 |
150 |
270 |
380 |
465 |
550 |
| Tear Strength, (Avg.) grams |
MD |
180 |
225 |
450 |
615 |
830 |
950 |
| CMD |
290 |
425 |
740 |
900 |
1000 |
1000+ |
| Dielectric Strength, (Avg.) grams AC, 25˚C (Avg.) |
volts/mil |
225 |
250 |
250 |
250 |
250 |
250 |
Click here to download the Hitex Spec Sheet.
“Values shown are typical, are not guaranteed, nor to be used for specifications without approval.”
NOTICE: The above information and data are believed to be accurate and reliable. Windsor-Stevens assumes no responsibility for end-use applications and no performance warranty is expressed or implied.
|
